Most homeowners pay somewhere between $50 and $200 per square foot for quartz, with labor and materials included, and the average lands near $125 per square foot, according to Bob Vila's quartz pricing guide. For a typical kitchen, that usually means a few thousand dollars. Where you land in that range depends on the slab you pick, the edge, the cutouts and your local labor rates. This guide shows how to measure your kitchen, turn the measurements into a budget, and read a quote line by line.
TL;DR
- Installed quartz commonly runs $50 to $200 per square foot, with an average of about $125 per square foot.
- Measure each countertop section, multiply length by depth (about 25.5 inches deep), and add the sections to get square footage.
- Sink and cooktop cutouts typically add $100 to $350 each, and removing old countertops averages about $5 to $15 per square foot.
- A good quote lists the brand and color, square footage, edge, cutouts, installation, tear-out and exclusions separately.
- Our Orlando team offers free 3D kitchen design and project estimates, so you can get a number built around your layout.
Table of Contents
- How much quartz countertops cost per square foot
- Quartz countertop cost for a typical kitchen
- What changes the price of quartz
- How to measure your countertops
- Quartz vs. granite: how the cost compares
- How to read a quartz countertop quote
- Ways to keep your quartz budget under control
- Our perspective
- Quartz countertops in Orlando and Central Florida
- Get a quartz estimate built around your kitchen
- FAQ
- Sources
How much quartz countertops cost per square foot
The widest range you will see is $50 to $200 per square foot including both labor and materials. Bob Vila puts the average at about $125 per square foot, and notes that old-countertop removal averages about $5 to $15 per square foot on top of that (Bob Vila).
That spread is large because "quartz" covers many products. A plain, light-colored slab with a simple edge sits at the low end. A premium veined pattern, a thick slab or a detailed edge pushes you toward the top.
Here is a simple way to think about the tiers:
| Project style | What it usually means | Where it falls in the range |
|---|---|---|
| Budget-focused | Standard color, basic edge, few cutouts, simple layout | Lower end of $50 to $200 |
| Middle of the road | Popular colors, a nicer edge, one sink cutout, a backsplash | Around the $125 average |
| Premium | Dramatic veining, thick slab, waterfall ends, many seams to match | Upper end of the range |
Prices also differ by region. Labor costs in a big coastal metro are not the same as in Central Florida, so treat any national number as a starting point and get a local estimate before you commit.
Quartz countertop cost for a typical kitchen
The per-square-foot price only helps once you know your square footage. Here is a worked example using the national range above.
Say your kitchen has a 12-foot run along one wall and an 8-foot run along the adjoining wall, forming an L.
- Convert the depth to feet: 25.5 inches is 2.125 feet.
- Run A: 12 ft × 2.125 ft = 25.5 sq ft.
- Run B: the 8-foot wall includes the corner already covered by Run A, so subtract 2.125 ft. That leaves 5.875 ft × 2.125 ft = about 12.5 sq ft.
- Total: about 38 sq ft.
At the national range, that kitchen costs roughly:
| Price per sq ft | Estimated total for 38 sq ft |
|---|---|
| $50 (low end) | $1,900 |
| $125 (average) | $4,750 |
| $200 (high end) | $7,600 |
Those totals are the countertop itself. Removal of the old tops, at about $5 to $15 per square foot, would add roughly $190 to $570 for this kitchen. Sink or cooktop cutouts and plumbing work are separate.
What about a 10-foot countertop?
A single 10-foot run at 25.5 inches deep is about 21 square feet. At $50 to $200 per square foot, that is roughly $1,060 to $4,250, or about $2,660 at the $125 average. Because a full slab is cut to fit your layout, ask the fabricator to show how your pieces nest on the slab. Fewer, well-placed seams look better and can keep waste down.
What changes the price of quartz
Several choices move your total more than anything else. Here is what to look at, roughly in order of impact.
Slab grade and color
Premium patterns and designer colors cost more than standard ones. If you are watching the budget, ask to see a few mid-priced colors in person. Samples under your own kitchen lighting tell you more than a photo does.
Edge profile and thickness
A simple eased edge is the budget choice. Ogee, bevel or mitered edges take more fabrication time. A thicker slab or a built-up edge costs more in both material and labor.
Cutouts
Sink and cooktop cutouts typically cost $100 to $350 each depending on complexity (Slabwise). An undermount sink or a farmhouse sink is more involved than a drop-in. Faucet holes and soap dispenser holes count too.
Layout, seams and backsplash
An island, a long run that needs a seam, or a full-height backsplash all add material and labor. A matching backsplash is an upgrade many people choose, so price it separately to see what it adds.
Demolition, delivery and disposal
Tear-out of old tops averages about $5 to $15 per square foot (Bob Vila). Delivery and haul-away may be built into a quote or listed on their own lines. Plumbing disconnects and reconnects for the sink are often handled by a separate tradesperson, so ask who covers them.
How to measure your countertops
A careful measurement gives you a budget you can trust. You need a tape measure, paper and about ten minutes.
- Sketch the layout. Draw each straight section of countertop as its own rectangle: each wall run, the island, any peninsula.
- Measure the length of each section along the back wall or the longest edge, in inches.
- Measure the depth. Standard countertops are usually about 25.5 inches deep, which covers the cabinet plus a small overhang (Slabwise). Islands with seating overhangs are deeper, so measure them.
- Multiply length by depth for each section, then divide by 144 to convert square inches to square feet.
- Handle corners once. In an L-shape, count the corner square in only one of the two runs, as in the example above.
- Add the backsplash if you want one: length times height, in inches, divided by 144.
- Note every cutout: sink, cooktop, faucet holes.
Your measurement is for budgeting. The fabricator will still take final measurements or make a template before cutting. Digital templating with laser or LiDAR tends to be more accurate than older stick templates and can reduce waste (Slabwise), so ask which method your fabricator uses.
Quartz vs. granite: how the cost compares
Both materials have wide price ranges, and they overlap. A budget granite and a budget quartz can cost about the same installed, while rare granite slabs and designer quartz both climb quickly. Because of that overlap, price is rarely the best way to pick between them.
What tends to decide it:
- Look: Quartz is engineered, so the color and pattern are consistent from slab to slab. Granite is natural, so each slab is unique.
- Upkeep: Quartz is non-porous, so it does not need sealing. Natural stone is usually sealed on a schedule.
- Budget: Compare two actual quotes for the two specific slabs you like instead of relying on averages.
We sell both quartz and natural stone countertops, so you can compare slabs side by side at our showroom and see which fits your kitchen and budget.
How to read a quartz countertop quote
Two quotes can look very different and still describe the same job. The difference is often what each one leaves out. A complete quote states, on separate lines:
- The brand, color and thickness of the slab
- The measured square footage and how it was measured
- The layout and where seams fall
- The edge profile
- Every cutout and hole
- Backsplash
- Delivery, installation and tear-out
- Exclusions, such as plumbing work
- Payment terms, change-order rules and warranty
That checklist follows what Stonify's guide to writing a countertop quote recommends a quote include. If a line is missing, ask about it before you sign, so there are no surprises on installation day.
Ways to keep your quartz budget under control
You can trim cost without giving up the look:
- Pick a standard-priced color. Many attractive options sit in the middle tier.
- Choose a simple edge. An eased or square edge is the easiest to fabricate.
- Keep the layout simple. Fewer seams, fewer cutouts and a straight run are cheaper than complex shapes.
- Skip the full backsplash if a short one works for you.
- Order materials and fabrication together, so one team is responsible for fit and finish.
- Get your measurements ready before you ask for estimates. It speeds up quoting and makes quotes easier to compare.
- Plan the order of work. Countertops are templated after the cabinets are installed, so settle your cabinet plan first.
If you are replacing an existing countertop, also ask whether the base cabinets are in good shape. New quartz on cabinets that are level and sturdy saves you the cost of new cabinets.
Our perspective
We see the same thing with almost every customer: the surprise in a countertop budget is rarely the price per square foot. It is everything around it, like the edge, the cutouts, the seams and the tear-out.
That is why we start with measurements and a design, not a sales pitch. We offer free 3D kitchen design and project estimates, so you can see your layout and your total before you spend anything.
We are a family-owned Orlando supplier that works at factory-direct and wholesale-oriented pricing, and we keep quartz, natural stone, cabinets and flooring in one place. Choosing the countertop alongside the cabinets means the colors and the measurements line up the first time. For homeowners, contractors and investors, that usually means fewer change orders and a project that stays on budget.
Sunshine Home Material
Quartz countertops in Orlando and Central Florida
If you are planning a kitchen in Orlando, Winter Park, Bay Hill, Belle Isle or the surrounding area, a local supplier shortens the process. You can view slabs in person, compare colors under real light and get an estimate based on your own kitchen.
We can help with:
- Quartz countertop fabrication in Orlando
- Full-size quartz and natural stone slabs
- Cabinet selection, planning and assembly
- Local delivery, nationwide shipping and warehouse pickup
- Referrals to independent installation professionals
Investors and property managers who are updating rentals may also like our guide to countertop choices for Orlando vacation rentals.
Get a quartz estimate built around your kitchen
Bring your measurements, or let us help you take them. Our team will walk you through slab options, edges and cutouts, and put together a free 3D kitchen design and project estimate. Financing options are available for qualifying customers, and contractors and designers can ask about wholesale purchasing support.
Start with our full fabrication services, or visit Sunshine Home Material to see the showrooms and request an estimate. If your remodel includes a bathroom, our vanity lines currently range from $384 to $1,535 depending on the line and size, and you can browse them on the bathroom vanities page.
FAQ
How much does it cost to replace kitchen countertops with quartz?
For a typical kitchen of around 38 square feet, expect roughly $1,900 to $7,600 at the national range of $50 to $200 per square foot, with about $4,750 at the $125 average. Removing old tops adds about $5 to $15 per square foot. Cutouts, edges and plumbing work can add to the total.
How do I measure for countertops?
Measure each section's length and multiply by its depth, usually about 25.5 inches. Convert to square feet by dividing by 144, count each corner only once and add the backsplash separately. Your fabricator will confirm with a final measurement or template.
How much does a 10-foot quartz countertop cost?
A 10-foot run at about 25.5 inches deep is roughly 21 square feet. At $50 to $200 per square foot that comes to about $1,060 to $4,250, or about $2,660 at the $125 average. Cutouts, edges and removal are extra.
Is quartz more expensive than granite?
Not always. The price ranges overlap, and the final cost depends on the slab, the edge and the layout. Compare quotes for the exact slabs you like.
What should a quartz countertop quote include?
It should list the slab brand, color and thickness, the measured square footage, seams, edge profile, every cutout, backsplash, delivery, installation, tear-out, exclusions, payment terms and warranty on separate lines.
Sources
- Quartz Countertops Cost: A Budgeting Guide, Bob Vila
- Quartz countertop cost per square foot: 2026 pricing guide, Slabwise
- How to write a countertop quote, Stonify