Replacing a bathroom sink is a one-day job when the new basin matches the old one in mounting style and size. Homewyse's May 2026 calculator puts the national average to install a bathroom sink at $611 to $914 per sink. The cheapest route is a like-for-like swap on a sound countertop. The smartest route, when the top or cabinet is worn, is often a complete vanity with the sink already built in. This guide covers both, with the checks and steps that keep the job on budget.
TL;DR
- Homewyse's May 2026 national average to install a bathroom sink is $611 to $914. Removal alone is estimated at $150.04 to $357.47.
- Match the new sink's mounting style (drop-in, undermount, vessel, integrated) and the faucet hole spacing to what you have now.
- A like-for-like swap with working shutoff valves is a manageable weekend project. Moving the drain or finding corroded valves changes that.
- If the vanity top is chipped, stained or has an integrated sink, replacing the whole vanity can cost about the same and finish the job.
- In Central Florida, we can help you pick a vanity or sink, plan the fit and get in-stock items delivered.
Table of Contents
- What bathroom sink replacement costs
- Replace the sink only, or the whole vanity?
- When a sink needs replacing
- Before you start: measure and gather
- How to replace a bathroom sink, step by step
- When to hand the work to a pro
- Where to save on a bathroom sink replacement
- Our view on replacing the sink or the vanity
- Get the right sink or vanity in Orlando
- FAQ
- Sources
What bathroom sink replacement costs
Cost depends on three things: the sink, the labor and whether the plumbing moves.
Homewyse's May 2026 figures assume basic mid-range work with in-stock products. They show $611 to $914 per sink installed, $150.04 to $357.47 for removing the old one and $5.67 to $6.45 for debris disposal. These figures come from a calculator and are updated as labor and material prices change, so use them as a planning range and not a quote.

Other 2026 guides give wider ranges. Current Cost's February 2026 guide lists a typical total of $350 to $1,200, with mid-range jobs around $500 to $800. Labor runs about $40 to $120 per hour. A basic drop-in porcelain job takes 3 to 4 hours, and a vessel sink with custom plumbing can take far longer.
Here is how that breaks down for a homeowner:
| Cost factor | What drives it |
|---|---|
| The sink | Basic porcelain drop-ins sit at the low end. Stone, glass and designer vessels cost more. |
| Faucet and drain parts | A new faucet, supply lines and a P-trap kit are small line items that add up. |
| Labor | Hours of work, which grow with corroded valves, tight cabinets or a vessel setup. |
| Moving plumbing | Shifting the drain or supply lines is the biggest budget risk. |
| Countertop work | Cutting stone for a different undermount bowl is a separate cost. |
If you are replacing a faucet at the same time, our bathroom faucet replacement guide walks through that part.
Replace the sink only, or the whole vanity?
You can replace just the sink when the countertop and cabinet are in good shape and can take the new basin. Which sink you have decides how easy that is.
Drop-in sinks
A drop-in (also called self-rimming) sits in a cutout with its rim resting on the counter. It is the easiest swap. The new bowl should be the same size as the cutout or slightly larger, so measure the opening, not the old rim.
Undermount sinks
An undermount is attached below the counter. The new bowl has to match the existing cutout closely. If it is smaller or a different shape, the stone has to be re-cut or replaced, which can cost more than the sink.
Vessel sinks
A vessel sits on top of the counter. It swaps freely, but it raises the sink height, so you generally need a taller faucet. Check that the counter is drilled for the faucet you want.
Integrated sinks
Some vanity tops are molded as one piece with the basin. A chip or crack means replacing the whole top. That is the case where buying a new vanity is the practical answer.
Field 52's replacement guide recommends comparing your measured countertop opening with the manufacturer's template for any sink you are considering, and checking support, cabinet clearance and obstructions underneath before you buy.

When a new vanity makes more sense
Choose a whole vanity when:
- The top is cracked, stained or delaminating around the old sink.
- The cabinet base has water damage or swollen panels.
- The sink is integrated into the top.
- You want a different size or style anyway.
- The cost of cutting stone for a new undermount is close to the price of a new unit.
Our bathroom vanities come in sizes and series for most bathrooms. Published prices run from $384 to $522 for the 01-CX series, $456 to $780 for the 02-IMO series, $387 to $690 for the 03-IMO series, $495 to $1,089 for the 03-WH series and $545 to $1,535 for the 06-DOK series. If you want a stone top, our guide to a bathroom vanity with a quartz top explains how to choose. For local pricing context, see bathroom vanities in Florida.
When a sink needs replacing
Not every problem needs a new sink. A dripping faucet or a slow drain is usually a repair. Replace the sink when:
- The basin has a deep crack or several small ones, especially above a cabinet that water could reach.
- The finish is stained, rusted or chipped beyond cleaning.
- You are updating the whole bathroom and the sink style no longer fits.
- The sink or top is loose, or leaking around the rim or seal.
If a leak is inside a wall or cabinet, if there is water damage or mold, or if pipes look corroded or cracked, stop and call a licensed plumber before you replace anything. Water damage hidden behind the vanity needs fixing first.
Before you start: measure and gather
Spend 20 minutes on measuring and you avoid the most common return trip to the store.
- Measure the countertop cutout. For drop-ins, use the opening. For undermounts, measure the cutout and note the edge profile.
- Check faucet holes. Count the holes and measure the spacing. Common layouts are single-hole, 4-inch centerset and 8-inch widespread.
- Find the drain position. The new drain should land roughly over the existing P-trap, so you do not have to reroute pipes.
- Check cabinet clearance. Look at drawer travel and storage space below the sink.
- Confirm the shutoff valves. Turn each one clockwise. If they will not close fully, plan for a valve replacement.
Tools and materials
This Old House lists an adjustable wrench, pliers, putty knife, rags and screwdriver, plus the new sink and faucet. In a cramped vanity, a basin wrench helps reach faucet nuts. You will also want a bucket, towels, plumber's putty or silicone, and new supply lines. A pop-up drain stopper assembly takes about 30 minutes to an hour and $20 to $50 in parts, using a kit that matches the standard 1.25-inch drain size.
Plumber's putty can stain natural stone. For a stone sink, use silicone instead.

How to replace a bathroom sink, step by step
The sequence below follows the standard drop-in method. Take photos of the plumbing under the sink before you begin.
1. Shut off the water and release pressure
Turn the shutoff valves under the sink clockwise, then open the faucet to release the water left in the lines, as This Old House describes. If the valves are seized or missing, you would need to close the main house valve. That is also the sign to consider a plumber.
2. Disconnect supply lines and drain
Put a bucket underneath. Detach the supply lines, then loosen the slip nuts on the P-trap and take it off. Expect some water.
3. Free and lift out the old sink
Remove the mounting clips from below. Run a putty knife around the rim to break the caulk seal, then lift the sink out. Clean the counter surface so the new seal sticks.
4. Prep the new sink
Install the faucet on the new sink before you set it in place. It is much easier on a bench than inside the cabinet. Fit the drain strainer with plumber's putty (or silicone on stone).
5. Set the sink
Apply a bead of putty or silicone under the rim, drop the sink into the cutout and tighten the mounting clips evenly from below. For an undermount, the bowl is set and secured to the underside of the counter with silicone and clips.
6. Reconnect drain and supply lines
Connect the P-trap to the strainer and the wall drain. Attach the supply lines to the shutoff valves, hot on the left and cold on the right. Fix Up First advises hand-tight plus a quarter turn for slip nuts, since over-tightening can crack PVC fittings and crush the gasket in braided supply lines, causing slow leaks. If you want to understand how a home's supply and drain lines connect, this overview of home plumbing shows the basics.
7. Test for leaks
Turn the water back on slowly. Run the faucet for a couple of minutes, then check every joint with a dry paper towel. Check again after an hour and the next morning.
How long it takes
Plan for a few hours on a simple swap. A tight vanity, corroded valves or a drain that needs adjusting stretch that into half a day or more.
When to hand the work to a pro
A like-for-like swap with working shutoff valves and the same drain location is a reasonable DIY project. Bring in a licensed plumber when:
- The shutoff valves are corroded and will not close fully.
- The sink location is changing.
- You find galvanized drain pipes that could crack during the work.
- You see signs of a leak inside the wall or cabinet.
We can refer you to independent installation professionals, and our Assembly and Delivery services cover getting the materials ready. Ask when you place your order.
Where to save on a bathroom sink replacement
- Keep the plumbing where it is. Moving a drain or supply line is the costliest change.
- Match the existing mounting style. A drop-in for a drop-in avoids stone cutting.
- Buy the faucet and sink together. Make sure the hole count fits.
- Replace supply lines and the P-trap. They are inexpensive parts, and old ones are the usual source of leaks after a swap.
- Compare sink-only with a new vanity. If the top is worn, the whole unit may cost less than fixing it.
- Use in-stock items. They avoid waiting weeks and keep a bathroom out of service for less time.
For a bigger plan, see our guide to an affordable bathroom remodel.
Our view on replacing the sink or the vanity
Most sink replacements we talk about with customers start with a simple question: is the top still good? If it is, a matching basin and a new faucet bring a bathroom back for a modest budget.
If the top is chipped, stained or has the sink molded into it, we suggest looking at a complete vanity. Our vanity series run from compact units to larger ones, and the sink, cabinet and top arrive as a set that fits together.
We also offer free 3D design for kitchens and baths, so you can see the layout before you order. For Central Florida projects, in-stock materials can be delivered in 24 to 48 hours.
Sunshine Home Material
Get the right sink or vanity in Orlando
We are a family-owned showroom and design center in Orlando, serving homeowners, contractors, builders and property managers across Central Florida. We carry bathroom vanities, sinks and handles, and offer design guidance, project estimates, pickup, delivery and financing for qualified buyers. Start with our bathroom vanities, or contact us with your measurements.

Contractors and investors renovating several units can ask about wholesale purchasing support. See the full range on our main site.
FAQ
How much does it cost to replace a bathroom sink?
Homewyse's May 2026 national average for installing a bathroom sink is $611 to $914. Other 2026 guides give broader ranges of roughly $350 to $1,200. Your total depends on the sink, labor and whether plumbing or stone has to change.
Can you replace just the sink on a vanity?
Yes, if the countertop and cabinet are sound and the new sink fits the existing cutout and mounting style. An integrated sink that is molded into the top cannot be replaced alone. In that case you replace the top or the whole vanity.
How long does a bathroom sink replacement take?
A basic drop-in swap takes about 3 to 4 hours, according to Current Cost. Stuck valves, tight cabinets or a vessel sink with custom plumbing can push it well past that.
Should I replace the faucet at the same time?
Yes, when you can. Installing the faucet on the new sink before you set it in place is easier, and you only shut off the water once. Check that the faucet matches the sink's hole layout.
Sources
- Homewyse: Cost to Install Bathroom Sink
- Current Cost: Bathroom Sink Replacement Labor Cost Guide
- Field 52: Bathroom sink replacement
- This Old House: How To Install a New Sink and Faucet
- Build-Construct: How to Install a Pop-Up Bathroom Sink Drain Stopper
- Fix Up First: How to Install a Bathroom Sink
